Silence AC Hum Forever!Silence AC Hum Forever!Almost all AC hum (60Hz in the US) is caused by ground loops.These groundloops act like radio antennae picking up hum and noise. The Hum Eliminator completely eliminares this breaking the goundloops, making it impossible for the signal lines to pick up the AC hum and noise in the first place.
Just plug the Him Eliminator into the signal lines between offending pieces of equipment and you're done. It's that easy. No buss, no hum, NO signal degradation, No filtering, No noise gates, No dangerous ground lifts.
Here's the cool stuff. Automatically translates signal voltages to match differences in ground potentials avoiding clipping. Converts automatically between balanced and unbalanced lines. Smart 1/4" TRS jacks (tip, ring,sleeve) inputs and outputs. Frequency response 20HZ to 70kHz plus or minus .05dB. Distrortion less than .005%THD @ 1kHz. Crosstalk better than -97dB. Maximum source impedance 1kOhm. Mimimum load impedance 10kOhm. Available in 2 channel mini box or 8 channel single space rack unit. Two year warranty. Made in the USA. See our catalog for pricing.
Solve your -10dBV
to +4dBu problems NOW!If your studio has cassette decks, CD players, Synthesizers, effect processors, etc at -10dBV (most of us do) and a +4 Analog or Digital Recorder or Mixer (the PRO stuff!) What do you do? GET THE LINE LEVEL SHIFTER! from EBTECH! The Line Level Shifter uses the physic of inductance and impedance matching to increase or decrease the signal voltage without thhe added noise of active electronics. The Line LEvel Shifter also converts between balanced and unbalanced signal automatically. This is great because most -10dBV signals are unbalanced while most +4dBU signals are balanced. Also included is EBTECH's Hum Eliminator Technology to break the groudloops that cause AC HUM.
Here's the Specs. Automatically translates signal voltages to match differences in ground potentials avoiding clipping. Converts automatically between balanced and unbalanced lines. Smart 1/4" TRS jacks (tip, ring,sleeve) inputs and outputs. Completely passive design with audiophile quality components assures the best possible noise and distrortion performance. Frequency response 10Hz to 40kHz plus or minus 1dB into 10kOhm load. Distortion less than .002% THD @ 1kHz. Crosstalk better than -97dB. Maximum source impedance 1kOhm. Mimimum load impedance 10kOhm. Available in 2 channel mini box or 8 channel single space rack unit. Two year warranty. Made in the USA. See our catalog for pricing.