Now you can have the power of a full recording
studio at your fingertips without a second mortgage! Audio Pro, from Tracer
Technolgies and Canam Computers, provides all of the features of today's
hottest multitrack software packages with one slight difference... it's
inexpensive. Audio Pro can drive your project from start to finish without
complicating the process or getting in your way. Give it a try and keep
most of your money in your wallet, where it belongs!
Audio Pro Includes:
Direct to Disk 128 Digital Audio Tracks RealTime
Non Destructive Mixing
Full Automation User Definable
Mixer With 8 Groups
SMPTE/MTC Master or Slave Synchronization Multi
Sound Card Management
Real-Time Level and Pan Spatial Localization
Supports Simultaneous Mixing Of Different Bitwidths and Sample Rates
Synchronize to MIDI, CD or Video Files Full
Control via MIDI Commands
Forget High Price Plug-Ins!!! These are included...
Parametric EQ, Band Pass Filter, Compressor, Noise Gate,Chorus,Digital
Delay,Auto Pan
Audio Pro requires at least a Pentium 90 PC with 8megs
of RAM, Windows 3.1 or 95, Windows compatible sound card and SVGA monitor
(800x600, 256 colors)
List Price $349 Namm Special $299
The Best Just Keeps Getting Better!
DART Pro 32 is faster, more flexible and prettier then its younger brother
DART Pro.
We've also given you the ability to record your own CD's directly from
DART Pro 32, and you can even create your own complex filter with the new
Filter Builder. Signal Processing Functions
Singal Processing Functions
DeClick: Removes pops and clicks
ReTouch: Fills in large and small gaps
Duplicate: For filling editing sound gaps
DeHiss: Removes tape hiss
NoisePrint: Saves an image of a noise pattern
Filter Builder: Automation tool for restoration procesess
Sound Restoration Functions
Compare Mix - Mixing of audio signals 
Equalize, Split Unite signals
Lowpass, Highpass Bandpass filters
Bandstop Notch filters
Fade In, FadeOut Crossfade
Resample Adjust sample rate converter
CD-R Recording Included in DART Pro 32
Support for extraction of digital audio from prerecorded audio CDs 
Oragnize music into soundfiles and playlists
Listen to one or more soundfiles
Record to CD-R with just one button
Play the CD's anywhere-car, home, office, etc
Automatic full support of Redbook Audio recording standards
Supports DAT and audio tape recording
Other New Featurees
2x faster than DART Pro Record
a 78 RPM record on a 33 turntable
Converts Mono to Stereo and vice-versa Resample
Adjust sample rate conversions
Instant playback speed adjustment Trim
length function
CD Format-converts any file to 16 bit, 44.1 kHz with one click Pattern
Detection Tool
Spectrum analysis with 2D or 3D spectral views Filter
Builder- set up macros to sequence tools
Finally the ability to change display colors!
Pro 32 is priced @ $399.00 Namm Special $329
Diamond Cut Audio Restoration Tools is a Windows-based
program that gives you all of the software tools necessary to perform high
quality noise reduction. In addition, Diamond Cut is a powerful audio wavefile
editor for use in general audio applications. Diamond Cut is effective for
"cleaning up" old cylinder recordings, hill and dale Edison Diamond
Discs (verticals), old 78's (laterals), and of course, modern vinyl LP's
and 45 rpm records. DC-ART can be used for sound restoration, special effects,
forensic applications and other professional uses . Here's some noisy issues
Diamond Cut can address: need to hear the results of your noise removal
tools as the sound file is playing.Cut's solution the filter tools and effects
can be previewed in REAL TIME! You move the mouse, you hear the change.
Problem #1
You need to hear the results of your noise removal tools as the sound
file is playing.
Diamond Cut's Solution
All the filter tools and effects can be previewed in REAL TIME! You
move the mouse, you hear the change.
Problem #2
Master is recorded at a wrong or varying speed.
Diamond Cut's solution
Use the "Variable Speed Change Tool" to graphically adjust the
speed of the recording to compensate. The entire recording can be made faster
or slower, or the speed can be adjusted in REAL TIME! Notice (on the screen
shot below) that a very complex speed curve can be applied to overcome almost
any off-speed condition. In this example the speed will start out at 70%
faster then normal, quickly slow down to only 25% faster, and then slowly
rise again before starting another slow fall.
Problem #3
So much hum it can't be removed with a standard EQ or notch filter.
Diamond Cut's solution
The "Harmonic Reject Filter"! What happens? Those evil hums
are not perfect Sine waves but other noises masquerading as hums. While
working on this TYPE of noise there is a basic frequency of the hum or buzz
PLUS the harmonic overtones that must be dealt with. The Harmonic Reject
Filter notches out the basic frequency and, at the same time, removes up
to 500 harmonics in REAL TIME. Listen while you work...
Problem #4
Record an entire 6 song album side in one session, then split up the
individual tracks to pre-master for CD burning.
Diamond Cut's solution
Simply drop a marker on the wavefile where the tracks should occur. Fire
up the "Quantize for CD" function. Your markers magically move
to a position with a multiple of 2352 bytes, so perfect CD indexing is already
done. Next choose the Chop File Into Pieces function and voila, instant
CD Playlist.
Problem #5
After removing the noise from an original tape of a speech or sermon
the resulting wave file sounds "dead".
Diamond Cut's solution 
A high quality, fully adjustable Reverb. And guess what...? The Reverb
can be adjusted while you listen in REAL TIME.
Problem #6
Never got around to signing up for that post graduate course in noise
removal?
Diamond Cut's solution
Diamond Cut is very easy to use, the manual offers both beginner and
advanced information. The next time "what is a sone Alex" comes
up on Jeopardy, consult the extensive reference material in the Diamond
Cut manual. Ok, more spot quiz questions...what's the fundemental frequency
range of an accordian? What recordings are best played back with a 7.4 mil
Spherical stylus? Don't know...open up the book!
Problem #7
Noise on the original sound file dominates the actual audio signal.
Diamond Cut's solution.
Here are a combination of tools that work best. First apply the "Continuous
Noise Filter" (best for wide band noise like rumble and surface noise)
using a sample of the noise. Then attack the result file with the "Bandpass
Filter" using it's REAL TIME capability to remove the remaining noise
above and below the frequencies of the audio you want to save.
Problem #8
After uncovering a fabulous tune buried under a ton of noise, a swish or
whooshing artifact is still audible.
Diamond Cut's solution
The 
"Dynamic Noise Filter" is built on a "tracking algorithm"
that actually follows inter-modular noise (swish and whoosh for us commoners).
Preview the filter settings by ear in REAL TIME, then turn the filter loose
to finish the job.
Additional Features
Continuous Noise Filter--removes hiss (surface noise).
Dynamic Filter--removes hiss f>om audio signals.
Tunable Notch Filter--attenuates hum or acoustical feedback.
Harmonic Reject Filter--a new, powerful way to attack buzzes.
Reverb--"spice up" those old dead recordings with a professional
quality adjustable hall effect.
Continuously Variable Speed Change--for correcting off-speed masters.
Keep Residue Mode--listen to just the noise, in REAL TIME.
Make Waves--generates true Sine and Square waves for spectral analysis and
equipment testing.
Low, Band and High Pass filters with 1st, 2nd or 3rd order slopes.
10-band graphic equalizer to create better tonal balance.
Fade in, Fade out and Gain change functions.
Cut, Copy and Paste sections or entire wave files.
Spectrum analysis to aid in noise removal and frequency identification.
CD Quantization to create seamless CD master playlists.
Wave file playlist for creating master tapes.
Multiple markers with special features for easy CD pre-mastering
Save and recall settings for all filters.
Continuous and Adjustable gain changes with graphical editing.
Diamond Cut requires a 486 DX 33MHz or faster PC, at least 8 MB of RAM,
a 16 bit stereo sound card and Windows 3.x, 95 or NT 3.51 or 4.0.
The list price of Diamond Cut Audio Restoration Tools is $199.00 Namm
Special Only $99.00
The Production Spotting Tool
SPOT is the perfect tool for busy profesionals in the
TV/Film and Event Production industries who desire a fun and easy way to
streamline the tedious process of Edit List preparation. Say goodbye to
cryptic log sheets, frustrating word processors and generic spreadsheets!
SPOT catalogs Effects, Foley, Music and ADR lines by allowing users to capture
frame-accurate (when used with recommended VITC Timecode hardware) hit points
and event descriptions while locked to SMPTE timecode!
Designed by Emmy Award-winning sound editor John Hegedes, SPOT is the first
product of it's kind to dramatically reduce the time required to capture,
catalog, and manipulate SMPTE events. Log sheets and reports are a snap
and projects can be extremely east to learn and use while retaining sophisticated
features that professionals demand.
Professional Features Include
SMPTE Hit Point capture (in, out and re-spot) on-the-fly Frame accurate
VITC compatibility Character, Foley, Efx and Music editor/ librarians Project
Import/ Export Easy to read Time Code Display Logical on screen buttons
for ease of use Extensive key command equivalents
View Filter and Show/ Hide columns feature On screen Help Resizable column
widths and position shuffling Notes field has user definable description
hotkeys Sort/ find events based on any criteria Useful Summary reports for
talent/ studio scheduling Easy Report/ EDL printing Powerful yet fun and
easy to use
List Price $499 NAMM Special $399
Minimun System Requirements for SPOT are Windows 95, Pentium
100, 16 megs RAM and CD ROM drive.
Home ShowRoom Online Shopping Cart SpecialEvents Client Page Links
Software
Keyboards Pro
Audio Computers Accessories