m menu image  m home m cart


Focusrite iTrack Dock Studio Pack


Sold Out


  • Model: FocsiDockStdio
  • Shipping Weight: 7lbs
  • Manufactured by: Focusrite


The Focusrite iTrack Dock Studio Pack provides you with the tools to make professional iPad recordings. Included is an iPad audio interface with two microphone pre-amplifiers, a large diaphragm CM25 condenser microphone with stand clip, HP60 closed-back headphones, a 9.8' XLR cable, and a USB cable.

To start recording on iPad with quality 24-bit audio and sample rates of up to 96kHz, dock your iPad, connect the microphone and headphones, plug your instruments in, and hit record. The halos around the gain knobs turn from green to red if you get too loud, while the high headroom instrument input helps you get a clean recording. The large diaphragm condenser microphone is ideal for recording vocals and comes with an XLR lead and stand clip, so you can set up straight away. The professional closed-back headphones are designed to block out any distracting outside noise while you record and mix performances.

Precision converters transform your live performance into studio-quality 24-bit resolution digital audio, with sample rates of up to 96kHz and a dynamic range of over 105 dB


  • Two high quality line level inputs so you can plug synthesizers, drum machines or any other line level device in as well
  • Rings of light around the input gain controls turn from green to red if you get too loud
  • Allows you to charge your iPad, power a USB device and integrate with almost any class compliant USB MIDI controller, all without any USB hubs or camera connection kits
  • Features a large control knob and dedicated headphone level controls to help you set suitable output level
  • Download Tape, the Focusrite iPad recording app


Analog Input
Frequency Response Mic: 20 Hz - 20 kHz +/- 0.2 dB (minimum gain)
Line: 20 Hz - 20 kHz +/- 0.2 dB (minimum gain)
Instrument: 20 Hz - 20 kHz +/- 0.2 dB (minimum gain)
THD + N Mic: < -99 dB (minimum gain, -1dBFS input with 20 Hz / 20 kHz bandpass filter)
Line: < -98 dB (minimum gain, -1dBFS at output with 20 Hz / 20 kHz bandpass filter)
Instrument: < -90 dB (minimum gain, measured at max input level -1 dB, 20 Hz / 20 kHz bandpass filter)
Noise Mic: Equivalent Input Noise (EIN) < -125 dBu CCIR-RMS (measured at maximum gain with 150 ? termination)
Line: Noise (NiPoS) <-104 dBFS CCIR-RMS (measured at minimum gain with 50 ? termination)
Instrument: < -104 dBu CCIR-RMS (measured at minimum gain)
Gain Range Mic: -4 dB to +46 dB (dBFS / dBu) ±1 dB
Line: -22 dB to +28 dB (dBFS / dBu) ±1 dB
Instrument: -16 dB to +34 dB (dBFS / dBu) ±1 dB
Maximum Input Level Mic: > +4 dBu (at 1% THD)
Line: > +21 dBu (at 1% THD)
Instrument: > +14 dBu (at 1% THD)
Analog Outputs
Nominal Output Level 0 dBFS = > +10 dBu, balanced
0 dBFS = > +4b Bu, unbalanced
Frequency Response 20 Hz - 20 kHz +/- 0.2 dB
THD + N < -100 dB, balanced (0 dBFS input 20 Hz / 20 kHz bandpass filter)
Clock Sources Internal clock only
Dynamic Range 105 dB 'A-weighted' (all outputs)
Converter chipset D-A dynamic range 114 dB
Supported Bit/Sample Rates 44.1 kHz, 48 kHz, 96 kHz
24 Bit
LEDs 1 x Green, signal present (-24 dBFS)
1 x Red, signal overload (0 dBFS), peak held for approximately 1 sec
Dimensions (H x W x D) 2.5 x 11.0 x 6.6" (6.4 x 28.0 x 16.8 cm)
Weight 1.5 lb (0.7 kg)

Manufacturer Info



Who's Online

There currently are 26 guests online.