From now until June 30, 2016, you’ll get a free pair of the ISPD-4 Monitor Isolation Pads when you buy a pair of R65, R80, Eris E44, or Eris E66 monitors. - See more at: http://blog.presonus.com/index.php/2016/04/01/get-free-ispd-4-monitor-isolation-pads-with-purchase-of-select-presonus-monitors/#sthash.DOSeHhBx.dpuf
PreSonus Eris E8 Two-Way Active 8" Studio Monitor (Each)
Sound you can trust.
When you’re serious about creating music, you need studio monitors that will speak nothing but the truth. Eris®-series monitors deliver a smooth and accurate frequency response, powerful Class AB amplification with loads of headroom, and a suite of acoustic tuning controls to mitigate room anomalies. Whether you’re recording your first album or your latest hit, Eris monitors will ensure your vision is heard.
Kevlar woofers deliver a cleaner overall sound.
Every Eris-series studio monitor utilizes a custom-woven Kevlar® low-frequency driver. The weave and nature of the Eris E8’s eight-inch Kevlar woofer helps break up reflected energy, so fewer delayed reflections reach the listener’s ear. This provides a more constant dispersion pattern throughout the frequency range, resulting in less time-smeared audio and cleaner overall sound.
Monitors you can customize.
Today’s music producers deal with a wide variety of musical genres and often work in challenging mixing environments. That’s why Eris-series studio monitors offer extensive acoustic tuning controls. The three-position Acoustic Space switch helps to compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies. A Low Cutoff filter makes it easy to integrate a Temblor® subwoofer into your monitor setup.
Connect to virtually any line-level source.
With three different types of audio inputs, it’s easy to feed audio to your Eris monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E8 monitors provide balanced XLR, balanced ¼” TRS, and unbalanced RCA line-level inputs. With this selection, you’ll have no problem hooking your Eris speakers up to virtually any line-level source.
Thorough Protection Circuitry
RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Eris monitors also provide overheat protection, current-output limiting and subsonic protection. "Soft startup" amplifiers prevent damaging pops from sounding through the speakers when you power them up.
Specs:
Inputs
|
|
|
1- Balanced XLR |
|
1- Balanced ¼” TRS |
|
1- Unbalanced RCA |
Performance
|
|
Frequency Response |
35 Hz - 22 kHz |
Crossover Frequency |
2.2 kHz |
LF Amplifier Power |
75W |
HF Amplifier Power |
65W |
Peak SPL (@ 1 meter) |
105 dB |
LF Driver |
8” Kevlar® |
HF Driver |
1.25” silk dome |
Input Impedance |
10 kΩ |
User Controls
|
|
Volume Range |
A-type taper |
MF Control |
-6, 0, +6 dB |
HF Control |
-6, 0, +6 dB |
Low Cut |
Flat, 80 Hz, 100 Hz |
Acoustic Space |
Flat, -2 dB, -4 dB |
Protection
|
|
|
RF interference |
|
Output-current limiting |
|
Over-temperature |
|
Turn-on/off transient |
|
Subsonic filter |
|
External mains fuse |
Power
|
|
|
100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet
|
|
|
Vinyl-laminated, medium-density fiberboard |
Physical
|
|
Width |
9.84” (250 mm) |
Depth |
11.77” (299 mm) |
Height |
15.12” (384 mm) |
Weight |
22.2 lbs (10.07 kg) |
UPC: 673454002229